The classic pheasant gun is a 12- or 16-gauge repeater, chosen because ringneck pheasants are tough and often found in bunches. When the air is full of cackling roosters, as it commonly was back in the day and still is in some places, you want four or five hard-hitting shells at your disposal.
While gang hunting for swarms of pheasants is still very much a thing, hunting the birds one at a time, on your own, over dogs is more in vogue today than it used to be. Break-action guns are well suited to this style of hunting, and when shots are close over pointing dogs, you can downsize in gauge (while also expanding the definition of a pheasant gun) to a 20.
To sum it up: Today's pheasant gun is a pump, semiauto, or break-action in 12-, 16- or 20-gauge. Which of these is just right for you depends on your preference and how you like to hunt. But within that broad definition, some guns stand out as top pheasant guns. Here are 10 of them—a mix of classic shotguns you can find on the used market and currently-made guns you can buy new.
Winchester Model 12
Long, trim, sleek, deadly, the Model 12 has a smooth action and points and feels like a good O/U. It was Winchester’s successor to the John Browning-designed Model 97 pump. Introduced first as a 20-gauge called the Model 1912, it was made in all gauges (the .410 was a separate model, and 28s were rare) until 1964. Over 2 million were made, and many of those guns went pheasant hunting. If you had a Model 12 in your hands, you could face an eruption of pheasants from a weedy cornfield with confidence. I had a 16-gauge Model 12 for a while that was a perfect pheasant gun, at least for those who can remember to work a pump action when pheasants are in the air. Model 12s is good working condition, even in 16-gauge, start at around $700 and go up (sometimes very steeply up) depending on condition and specific models.
Browning Auto 5 Sweet 16
The Auto 5 had an incredible run of nearly 100 years. The first semiauto shotgun, it relied on a long-recoil action in which the barrel and the bolt moved back together 3 inches or more under recoil. It felt funny when you shot it, but it worked, always. There was nothing to compete with it for 50 years, both because John Browning was a genius and because John Browning patented every last part of the gun that he could, including the charging handle that is fairly essential to any semiauto shotgun design.
Whereas some gunmakers put 16-gauge barrels on 12-gauge guns and call it good, Browning scaled the Auto 5 frame to 16-gauge size in 1937. Engineers cut out some steel and took extra wood from the stock to make it lighter, and called the result the “Sweet 16,” and it was one of the greatest upland semiautos ever. The last of the Sweet 16s were made at Miroku in Japan, until they were discontinued in 1975.
The old Sweet 16 should not be confused with the new Sweet 16, a completely different inertia-operated gun that Browning currently produces. There are no flies on the new gun, either. It’s an easy-carrying 6 pounds, and it shares the famous humpback profile of the original Auto 5.
Related: Best Shotguns of 2024, Tested and Reviewed
Browning Superposed
John Browning, after a lifetime of inventing repeaters, turned to the break-action O/U as his final design. In fact, he died before he finished work on the Superposed, and his son, Val, completed the job. The elder Browning conceived of the Superposed as an affordable alternative to the only other O/Us on the market, which were high-end British guns. It was to be a gun that ordinary people could aspire to, and stretch their budgets to own.
Browning’s death, the introduction of the gun during a global financial disaster, a world war that saw the gun’s Belgian factory occupied, then blown up, all could have spelled the end for the Superposed. Instead, the gun found its market in the 50s and 60s. It would be made in Belgium through the early 70s, and it’s still made there as a custom gun. Rising Belgian labor costs forced Browning to move production to Japan, in the form of the simplified Citori, which we’ll get to later.
The 12-gauge Superposed weighs too much for serious dog-following, while the 20-gauge Lightning model is just right and can be found on the used market starting at around $2,500. If you want a 12, look for the straight-gripped Superlight Superposed, and you’ll have one of the best pheasant guns ever.
Remington Model 31
Remington had only bottom-eject pumps in its lineup prior to the Model 31. As a result, they had nothing that could compete with Winchester’s Model 12 in the target-shooting market, because bottom-eject guns are a pain to load for trap and skeet. The Model 31 was the answer, a butter-smooth, side-eject gun that Remington could sell against the Model 12 in the target market. It also made a great field gun, and its fervent fans say it was slicker than a Model 12. It was made in 12-, 16- and 20-gauge models, all with steel receivers and, as was unheard of at the time for repeaters, a lightweight aluminum frame model, known as the 31L. Just under 200,000 Model 31s were made between 1931 and 1949, when it was discontinued to make way for the 870, a gun that was much less costly to build and finally allowed Remington to undercut and outsell the Model 12. Although not a ton were made, compared to Model 12s, they turn up, and an alloy-framed Model 31 makes a great gun to carry in field. Working Model 31s start at around $500.
Benelli Super Black Eagle
I so desperately want this suspected urban legend to be true: I am told that Wall Street finance bros avoid the hassle of New York gun laws by simply buying a Super Black Eagle upon arrival to hunt in South Dakota. They shoot pheasants with it for the weekend, then leave the gun as tip for their guides. Monday morning, guides who already own enough gifted SBEs line up at the local sporting good stores to sell their new guns.
The Italian-made SBE was the first 3 ½-inch semiauto, introduced back in 1991. It’s unique inertia action gave it the advantages of light weight, trim lines, low maintenance, and dependability that quickly made it a favorite among midwestern pheasant hunters, even though few saw the need to shoot 3 ½-inch shells at pheasants. You see them throughout pheasant country, and where birds are numerous enough that driving and blocking the old way is still popular, some wear magazine extensions. Now in its third iteration as the SBE3, the gun also comes in 3-inch 12-, 20-, and 28-gauges, and the new guns have features the original lacked, like a recoil-absorbing stock and a bolt that can’t be bumped out of battery.
Browning Citori 725
If the Browning Superposed had flaws, and it did, it was a tall, ungainly action and a weight near 8 pounds in 12-gauge. It's successor, the Citori, had much the same issues, as a pheasant gun. So, in 2012 Browning engineers lightened the barrels and removed metal from the bottom of the frame, saving about ¾ pound and lowering the receiver profile to make the gun a more natural pointer. The result is the Citori 725—a great pheasant gun with the pedigree of a Browning O/U and none of the extra weight. It comes with a very effective recoil pad, too, and mechanical triggers. You can go even lighter with the alloy-framed 725 Feather if you walk a long way between birds. The guns come in 12-, 20- and 28-gauge, all with 3-inch chambers.
Beretta 680 Series
Beretta immediately responded to the Superposed with its own Sovraposti in the 1930s, but it was a high-grade gun. It wasn’t until the post-war era that the Italian maker came up with an ingenious, very low-profile O/U action consisting of two pointed lugs engaging into recesses between the barrels, designed so the gun would wear in, not out. It was trim, it was light, and Beretta first sold the gun under other names and series until they introduced the first 680s in the 1980s. The guns were, and still are, a favorite among pheasant hunters for the way they point instinctively and never give their owners a bit of trouble. Beretta sells new 680s and 690s now, but if you’re me, you look for used 680s from 20 to 30 years ago that are beautifully made and still have a few hundred thousand rounds of shooting left in them.
Ithaca Model 37
It took a long time to get the Ithaca 37 off the drawing board and into the field, as Ithaca had to wait for John Browning’s patents on the old Remington 17 to expire before creating their own take on the bottom-ejecting pump. Once the gun was finally introduced, it went into production and stayed there, with occasional lapses for bankruptcies and changes of ownership, and it is the last of the classic, pre-war pumps still made. It is trim gun, and many left-handers like bottom-eject for keeping ejecting shells out of their line of sight.
Over 2 million have been made, in 12-, 16-, and 20-gauge, with steel and alloy frames, some with straight stocks, and many with plain, ribless barrels that save a few more ounces. The gun is also still made today as a fairly expensive, small-batch pump, and there are tons of older, used 37s on the used market for as little as a few hundred bucks.
Related: 10 Best Shotguns for Grouse Hunting
Remington 870
Once ubiquitous and still seen everywhere, the 870 has been in production since 1950. Many millions have been made, and they have claimed who knows how many ringnecks. Designed to replace the expensive-to-build Model 31 and undercut the popular Winchester Model 12 in price, the 870 turned out to be a mass-produced classic. The 12-gauge was actually built on a 16-gauge 11-48 receiver, so it was already light and slim from the beginning. It was also incredibly reliable and easy to take apart and maintain, which made the gun very popular with police and military as well as with hunters.
Remington added all the gauges over time, plus straight grip models and a less-expensive Express model. The classic, glossy Wingmaster is the cool 870 to have, especially the 70s and 80s guns with the pressed fluer-de-lis checkering. After bankruptcy a few years ago, Remington’s gun division now exists as RemArms, and they are making both Wingmasters and less expensive FieldMasters now.
Weatherby Orion
Weatherby’s Orion O/U has been made by SKB in Japan, by Fausti in Italy, and, most recently, by ATA in Turkey. The classic is the old SKB version, made from 1981 to the 00s. They had a cross-bolt locking system similar to what you see on many German guns. They were very well-made, moderately-priced guns, many stocked with beautiful Claro walnut and the Weatherby diamond grip-cap. They came in 12- and 20-gauge, and some of the later guns had a rounded Prince of Wales grip in place of the full pistol grip. I had one and shot a bunch of pheasants with it. I can’t remember why I decided to part with it, but it wasn’t the smartest decision I ever made. It was a very good gun, as all SKBs were, and maybe I thought I could always get another, but the factory now makes auto parts, not guns. For a while, Weatherby imported Orion d’Italias from Brescia, Italy, that are good guns but hard to get excited about. They rank third among the various Orions in my book.
The latest version of the Orion comes from ATA in Turkey, and I was very pleasantly surprised by the one I shot on a recent visit to the Weatherby factory. These guns have an action very similar to the Beretta 680 series previously mentioned, and while they have a pregnant-looking bulgy forend, they also have a very appealing price tag of $1,049. The guns are unadorned, but well fit and finished, and you can choose between matte and glossy versions for the same money. It’s a bargain, it shoots well, and it’s proof that guns don’t have to cost a ton of money to drop roosters.